Learn How to Create Your Own Personalized Coasters for a Unique Touch to Your Home Decor

How to make custom coasters

If you’re looking for a fun and creative way to add a personal touch to your home decor, making custom coasters is a great option. Not only are they easy to make, but they also make for a perfect gift idea or a unique addition to your next gathering. In this article, we will show you step-by-step how to create your own custom coasters. Let’s dive in!

Materials You Will Need:

1. 8 tile coasters

2. Mod Podge or a similar sealant

3. A catalog or printouts of photos or designs you would like to use

4. Scissors or a paper trimmer

5. Clear spray varnish

6. A hot glue gun

7. Craft glue

8. Resin

9. A mixing spoon

10. Disposable cups

Step 1: Prepare the Coasters

The first step is to prepare the coasters you will be using. If they have a cork backing, remove it so that the tiles lay flat on the surface. Wipe the tiles clean and make sure there are no dust or debris left behind.

Step 2: Choose Your Design

Next, choose the images or designs you want to use for your coasters. You can use photos, prints, or even a map. Printifys or cut them to the desired size of the coasters.

Step 3: Glue the Design

Apply a thin layer of craft glue to the back of your chosen design and carefully place it on the center of the tile. Press down firmly to ensure it sticks well.

Step 4: Seal the Design

Using a brush or a sponge, apply a layer of Mod Podge or a similar sealant over the design and the tile surface. Make sure to cover the entire tile and let it dry completely.

Step 5: Add a Second Layer (Optional)

If you want to give your coasters a more finished look, you can add a second layer of Mod Podge or sealant. This will create a glossy effect and protect your design even more.

Step 6: Mix the Resin

Follow the instructions on the resin package to mix the resin. Usually, you will need to mix equal parts of resin and hardener in a disposable cup.

Step 7: Pour the Resin

Pour the mixed resin onto the center of each coaster, making sure not to overflow. Use a spoon to distribute the resin evenly, covering the entire surface of the tile.

Step 8: Remove Bubbles

Once the resin is poured, you might notice some bubbles forming on the surface. To remove them, you can use a heat gun or simply blow on them gently. Be careful not to breathe too closely to the resin.

Step 9: Let It Dry

Let the resin dry completely according to the instructions on the product packaging. This usually takes around 24 hours.

Step 10: Finishing Touches

Once the resin has dried, your custom coasters are almost done. Trim any excess resin that might have dripped over the edges. Apply a coat of clear spray varnish to the back and sides of the coaster for extra protection.

And there you have it – your very own set of custom coasters! Now you can proudly display your creative and personal touch every time you enjoy a hot cup of tea or set your favorite drink on them. Get ready to impress your guests with these simple and unique DIY coasters!

Contents

Coaster Ideas: Easy To Make Coasters At Home
1 Cut the desired area of the map with scissors
2 Mod Podge or Glue Tile
3 Glue down edges
4 Smoothe layer of glue over the top of the map
5 Let dry
6 Spray with acrylic sealant
7 Cut felt backing
8 Hot glue felt to the bottom of the tile
Design Your Own Custom Coasters in Three Easy Steps
Step 1
Sign Up With Printify
Step 2
Choose a Product
Step 3
Apply Your Custom Design
How to Make Coasters Decorating
How to Make DIY Photo Coasters
Step 1: Paint the edges of the tiles
Step 2 Trim your photos down for your DIY photo coasters
Step 3: Glue photos to center of tile
Step 4 Prepare the resin
Step 5: Spoon out resin onto your DIY photo coasters
Step 6: Repeat for each tile
Step 7: Get rid of the little bubbles
Step 8: Wait for them to dry
Step 9: Glue felt to the bottom of your tile coasters
Step 10 Enjoy your photo coasters
Read more photo gift projects
Video:
How to: DIY Personalized Coasters | Using Cricut

Coaster Ideas: Easy To Make Coasters At Home

If you’re looking for an enjoyable and creative crafting project, making custom coasters at home is a great choice. Not only is it a fun activity to do on your own or with family and friends, but it also allows you to add a personal touch to your home decor. Plus, you can print your favorite photos or design onto the coasters, making them a unique and meaningful addition to your living space.

Here’s what you’ll need to get started:

Materials	Tools
– Tiles	– Acrylic paint
– Mod Podge	– Paintbrush
– Foam brush	– Scissors
– Clear varnish	– Spoon
– Protective plastic sheet	– Spray adhesive

Once you have gathered all the necessary materials, you can begin the coaster-making process.

Step 1: Prepare the tiles by cleaning them thoroughly. This will ensure that the paint and Mod Podge adhere properly.

Step 2: Choose a photo or design that you would like to showcase on your coasters. Print it out and cut it to the size of the tile. Make sure the edges are clean and straight.

Step 3: Apply a coat of Mod Podge onto the tile using a foam brush. Place the photo or design onto the tile, making sure it is centered and aligned correctly. Use a spoon to press out any air bubbles and smooth out the surface.

Step 4: Allow the Mod Podge to dry completely. This usually takes around 15-20 minutes, but it’s best to follow the specific drying time mentioned on the product’s packaging.

Step 5: Once dry, apply another coat of Mod Podge on top of the photo or design. This will protect it and give it a glossy finish.

Step 6: Let the second coat of Mod Podge dry for at least an hour. This will ensure that the surface is fully set and protected.

Step 7: Apply a layer of clear varnish on top of the Mod Podge. This step is optional, but it adds an extra layer of protection and makes the coasters easier to clean.

Step 8: Allow the varnish to dry completely. This can take several hours, so it’s important to be patient and let it dry undisturbed.

Step 9: Once the coasters are fully dry, they’re ready to be used and enjoyed! You can place them on your coffee table, kitchen counter, or any other surface where you’d like to add a decorative touch.

There are many different coaster ideas and designs you can try. For example, you can use tinted Mod Podge to create a stained glass effect, or you can paint the edges of the tile in a contrasting color for a pop of color. The possibilities are endless, so let your creativity run wild!

Remember, making custom coasters at home is an easy and enjoyable DIY project that anyone can do. Whether you’re a seasoned crafter or a beginner, you’ll find that this project is a great way to add a personal touch to your living space. So gather your materials, choose your favorite photos or designs, and get ready to create your own unique set of coasters!

1 Cut the desired area of the map with scissors

To create custom coasters, the first step is to cut out the desired area of the map using a pair of scissors. This allows you to select the specific location or image that you want to use for your coasters.

Before you start cutting, make sure you have a print of the map or image you want to use. Take your time and be careful when cutting to ensure you get the desired part of the map.

If you’re not sure what area of the map to choose, take some time to explore different options. You can look through travel catalogs or browse online for inspiration. Maybe there’s a special place you have visited or plan to visit that would make a great addition to your custom coasters.

Once you have the desired area of the map cut out, you can move on to the next step in the coaster-making process. Remember that you can also use other decorative elements such as floral or abstract patterns if you prefer something other than a map.

It’s important to note that the size of the cut-out should fit within the dimensions of your coaster. Typically, coasters are square-shaped, so make sure the cut-out is a perfect square or adjust the size accordingly. This will ensure that the image fits perfectly on the coaster’s surface.

If you don’t have a map or image you want to use, you can also consider printing out a photo or creating your own design using arts and crafts techniques. The key is to get creative and personalize the coasters to your liking.

There are a few things you need to keep in mind when selecting a map or image. First, choose something that has a smooth and glossy finish, as this will create a better surface for your coasters. Additionally, consider using a heat-resistant material like ceramic or glass tiles, which will ensure that the image stays intact and doesn’t fade or warp with time.

Once you’ve chosen your desired image and prepared the materials, it’s time to move on to the next step in the coaster-making process. In the next step, you’ll learn how to attach the cut-out map or image onto the coaster’s surface.

2 Mod Podge or Glue Tile

If you want to make custom coasters, Mod Podge or glue is a great option to consider. This method requires a few supplies and can be a fun DIY project for any skill level.

To start, you will need four crystal or ceramic tiles. You can choose any size or shape that you prefer. Make sure to clean them before using to remove any dust or dirt.

Next, prepare your Mod Podge or glue mixture. You can mix equal parts of Mod Podge and water, or simply use a thin layer of glue. If you want to add a tint to your mixture, you can stir in a small amount of acrylic paint.

Using a brush or your finger, apply a thin layer of the Mod Podge or glue mixture to the bottom of each tile. Make sure to cover the entire surface evenly. Then, place your desired design on top of the wet adhesive. You can use paper, fabric, or any other material that you like. Press it down gently to remove any air bubbles.

Once you have placed your design, apply another layer of Mod Podge or glue on top to seal it. Make sure to smoothe out any wrinkles or creases. You can use your finger or a brush to do this.

If you’re going for a more creative or decorative look, you can add additional layers of Mod Podge or glue. Just make sure to let each layer dry completely before applying the next one. You might need about 2-3 coats for this.

Once all the layers are dry, your coasters are almost ready. If you want to make them more durable and waterproof, you can apply a layer of resin on top. This will give them a glossy and professional finish. Follow the instructions on the resin package to ensure the best results.

When working with resin, make sure to do it in a well-ventilated area and follow the safety precautions. Additionally, it’s always better to check with your local hardware store for any specific advice or guidance.

Let the resin dry for about 24 hours, and your custom coasters will be ready to use. They make a great gift, a lovely addition to your home, or a fun DIY project to do with friends and family.

Now that you’ve learned how to make custom coasters using Mod Podge or glue, you can try out different designs and experiment with other materials. The possibilities are endless, and you’ll always have a unique set of coasters for your next gathering or tea-time!

3 Glue down edges

Now that you have your custom coasters design printed and trimmed to the right size, it’s time to glue down the edges. This step is crucial for ensuring that your coasters stay intact and look professional.

Start by checking each coaster to make sure there are no rough or open edges. If there are, use a scrap piece of sandpaper to smoothen them out.

Next, take a good quality craft glue – a hot glue gun works great for this – and apply a thin line of glue along each edge of your coaster. Make sure to cover the entire edge, but be careful not to apply too much glue or it might overflow onto the top of the coaster.

Press the glued edge firmly against the tile or plastic coaster base, making sure it sticks securely. Hold it in place for a few seconds to allow the glue to bond properly.

If you’re making custom coasters with photographs or a design printed on paper, it’s important to seal the edges with a protective layer. This will prevent the edges from peeling or getting stained over time.

To do this, you can use a product like Mod Podge, which is a popular craft product. Simply apply a thin coat of Mod Podge over the glued edges, using a foam brush or a spoon to spread it evenly. Allow it to dry completely before moving on to the next step.

If you want to add an extra layer of protection, you can also varnish the top of your coasters. This will make them more durable and resistant to heat and spills. Use a polyurethane spray or brush-on varnish, following the instructions on the product.

Once the glue and varnish have dried completely, your custom coasters are ready to use! They will make a great addition to your home or a unique gift for someone special. Thanks to these easy steps, you can now create your own custom coasters for any occasion.

4 Smoothe layer of glue over the top of the map

Once you have prepared your map and cut it to the size of your coaster, it’s time to start the gluing process. One product that works really well for this is Mod Podge, a popular adhesive used in arts and crafts.

Take your map and place it on a flat surface.
Using a foam brush or a paintbrush, take some Mod Podge and apply a thin, even coat onto the back of the map. Make sure to cover the entire surface.
Flip the map over and carefully place it onto the tile or coaster backing. Press down firmly to eliminate any bubbles or wrinkles.
Next, apply a second coat of Mod Podge over the top of the map. This helps to seal the map and protect it from water damage.
Use a spoon or your finger to spread the glue evenly over the entire surface. Make sure to get into the edges and corners.
Allow the first layer to dry completely before applying a second coat. This will ensure a smooth and glossy finish.
Repeat the same process for the second coat of Mod Podge. Apply it in the same manner as before, making sure to cover the entire surface.
Let the second coat dry completely. This may take a few hours or overnight, depending on the Mod Podge product you choose.
Once the Mod Podge dries, you can add a final layer of sealant to give your coasters a beautiful matte or glossy finish. You can use Mod Podge, or you can find other sealant products specifically made for this purpose.

Following these steps will ensure that your custom coasters are well-protected and ready to use as gifts or for your own enjoyment. The layers of glue will create a smoothe and durable surface, allowing your photography or other works to shine through. Get creative with your designs and enjoy making these personalized coasters for your home. It’s an easy and fun project that makes for a great gift or a unique addition to your own space.

5 Let dry

After you have applied all the coats of Mod Podge and your coaster is completely covered, you must let it dry properly. It is recommended to let it dry for at least 24 hours to ensure that the Mod Podge has thoroughly dried and hardened.

If you choose to add a design or print to your coaster, make sure that you wait for the Mod Podge to dry completely before moving on to the next step. This will prevent any smudging or distortion of the design.

During the drying process, it is important to place your coaster on a smoothe surface to ensure that it dries out properly and does not stick to anything. You can use a piece of felt or a trim to create a protective layer between the coaster and the surface it is placed on.

Once the Mod Podge is dry, you can remove any excess glue or trim that may be sticking out from the edges. Use a pair of scissors or a craft knife to carefully trim off any unwanted parts.

Now that your coaster is completely dry and trimmed, it is ready for the next steps of the DIY coaster project. Depending on the desired look, you can leave the coaster as is or continue to add more layers of Mod Podge for a glossy finish.

Remember, the drying process may vary depending on the humidity and temperature of your local area. Always follow the instructions on the Mod Podge package for the best results.

By letting your coaster dry properly, you will ensure that all the layers of Mod Podge have bonded together and that your coaster is ready for use.

Now that your coaster is dry, you can enjoy using it or give it as a gift to someone special. Coasters make great personalized gifts that are both practical and decorative.

Thanks for following this step-by-step guide on how to make custom coasters. We hope you learned something new and that you have fun decorating your own coasters.

6 Spray with acrylic sealant

Once you’re satisfied with the way your custom coaster looks, it’s time to seal it! Using an acrylic sealant will protect your design and make it more durable. You can find acrylic sealants at most local craft stores or online. Here’s how to do it:

Cover your work surface with a plastic or matte surface to protect it from any overspray.
If your coaster has a backing, remove it so you can properly seal all parts of the coaster.
Shake the acrylic sealant can well and wear gloves to protect your hands.
Hold the can about 8 inches away from the coaster and spray a thin, even coat of sealant. Start at the center and work your way out to the edges, moving in a circular motion to cover the entire surface.
Make sure to spray the edges of the coaster as well to seal them.
Let the first coat dry for about 15 minutes, or as instructed on the product label.
Repeat the spraying process with at least two more coats, allowing each coat to dry completely before applying the next one. This will ensure a better seal and more protection.
If you notice any bubbles or imperfections on the surface, gently wipe them away with a clean cloth while the sealant is still wet.
Once the final coat is applied, let the coaster dry for at least 24 hours before using it. This will give the sealant enough time to cure and become smoothe.

Now you have a perfectly sealed custom coaster that is ready to be used or given as a gift. Thanks to the acrylic sealant, your design will stay intact and protected against spills and moisture.

7 Cut felt backing

After you have completed the previous steps and your coasters are dry and smoothe, it’s time to add a felt backing to protect the surfaces they will be placed on. This step is important to prevent any scratching or damage to your furniture.

To prepare for this step, you will need scissors and a sheet of felt. You can find felt in many colors and thicknesses at your local craft store or online. Choose a color that complements your coaster design or matches your home decor.

Start by placing one of your coasters on top of the felt sheet and using a pencil or pen, trace around the edges to create an outline. Repeat this process for all of your coasters.

Next, carefully cut along the outlines you have created, using a pair of scissors. Take your time to ensure that the edges are smooth and the felt fits properly on the coaster.

Once all of your felt pieces are cut, you can begin attaching them to the back of your coasters. Apply a thin layer of craft glue or Mod Podge to the back side of each coaster, making sure to cover the entire surface.

Place the felt piece on top of the glue, aligning the edges with the coaster. Lightly press down to make sure the felt sticks to the surface without any bubbles or wrinkles.

Let the glue dry for about 10-15 minutes before moving on to the next coaster. Repeat this process for all of your coasters.

After all of your coasters have been attached with felt, you’re almost done! This final step will help seal the edges and give your coasters a finished look.

Using a foam brush or sponge brush, apply a thin coat of acrylic sealant over the top and sides of each coaster. This will protect the surface from water damage, heat, and general wear and tear.

Allow the sealant to dry for a few minutes, then apply a second coat for extra protection. Be sure to read the instructions on your sealant product for proper drying times and application techniques.

After the second coat of sealant is dry, your custom coasters are ready to use and enjoy! They make great gifts for friends and family, or can be a fun addition to your own home decor.

Now that you know how to make custom coasters, you can let your creativity run wild and come up with many more ideas for crafting projects. The possibilities are endless!

8 Hot glue felt to the bottom of the tile

Once your design is completely dry and sealed with epoxy or Mod Podge, it’s time to add a backing to protect your surfaces. For this step, you will need felt and a hot glue gun.

Start by cutting a square of felt that is slightly smaller than your tile. This will ensure that the felt is not visible from the sides when the coaster is in use. If you have any decorative edges on your tile, make sure to account for those in your measurements.

Next, heat up your hot glue gun. Once it’s ready, apply a generous amount of hot glue to the bottom center of the tile. Immediately press the felt square onto the hot glue, making sure to center it as best as you can. The hot glue will dry quickly, so you need to work efficiently.

Press down firmly on the felt for a few seconds to make sure it adheres properly. The hot glue creates a strong bond between the tile and the felt, ensuring that the backing stays in place even with regular use.

Repeat this process for each coaster that you’ve created, making sure to let the hot glue dry completely before moving on to the next one.

Once the felt is secure, flip the coaster over and trim any excess felt that may be sticking out beyond the edges. This will give your coaster a neater and more finished appearance.

With the felt backing in place, your custom coaster is now complete! The felt provides a soft and protective surface that will prevent your coaster from scratching any delicate surfaces. It also adds a nice finishing touch to your DIY project.

Now you can sit back, relax, and enjoy your favorite drinks without worrying about damaging your furniture. These custom coasters make great conversation starters and personalized gifts. You can even create a matching set with different designs or photographs that reflect your own creative style.

Thanks to Dana White Photography for the step-by-step instructions on how to make custom coasters. Check out her website for more DIY projects and photography tips!

Design Your Own Custom Coasters in Three Easy Steps

Creating your own custom coasters is a fun and creative DIY project that adds a personal touch to your home decor or makes for a great gift. With just a few simple materials and some creativity, you can design unique coasters that reflect your style and personality. Here’s a step-by-step guide to help you get started:

Gather Your Materials

To create your custom coasters, you will need:

Four blank tiles
Paint or decorative paper
Scrap paper or catalog cutouts
Mod Podge or a similar glue/sealant
A foam brush
Scissors
A ruler
A pencil
A spray sealant

Make sure to clean and dry the tiles before starting your project.

Design and Decorate

Now comes the fun part! Use your creativity to design your custom coasters.

Paint the tiles with your desired colors or patterns. You can use a stencil or create your own designs.
Alternatively, you can cut out pictures from magazines or catalogs to create a collaged effect by gluing them onto the tiles.
If you’re feeling extra creative, you can even transfer your own photographs onto the tiles using a heat transfer product.

Let the paint or glue dry completely.

Seal and Finish

To protect your custom coasters and ensure they last for a long time, it’s important to seal and finish them.

Apply a coat of Mod Podge or a similar sealant to the painted or glued surface of each tile. Use a foam brush for a smoothe application.
Let the first coat dry for about 15 minutes, then apply a second coat. Repeat this process for a total of four coats. This will give your coasters a durable and waterproof finish.
After the final coat is dry, smoothe any rough edges with sandpaper.

With just three simple steps, your custom coasters are now ready to use or give as a gift!

Remember, there are no wrong ideas when it comes to designing your coasters. You can always find inspiration from nature, art, or even your favorite prints or patterns. Get creative and have fun!

Step 1

To make custom coasters, the first step is to gather all the necessary supplies. You’ll need:

A square piece of wood or cork for the coaster base
Decorative paper or photographs for the top of the coaster
Scrap foam or felt to protect the bottom of the coaster
Acrylic or epoxy resin for the clear layer
A heat-resistant varnish or polyurethane to seal the coaster
Glue or adhesive spray
Crafting tools such as scissors and a ruler
A foam brush or paintbrush
A small container to mix the resin
A stir stick or teaspoon for stirring

Once you have all your supplies ready, you’re ready to move on to the next step!

If you’re looking to create custom coasters, one of the must-have tools is Printify. Printify is a DIY printing service that allows you to design and print your own decorative coasters. With Printify, you can create unique and personalized coasters that are perfect for adding a personal touch to your home decor or gifting to friends and family.

Before you get started with your coaster-making project, there are a few things you’ll need to prepare. First, make sure you have a clear and smooth surface to work on. A rolling mat or a scrap piece of cardboard works great for this. Next, gather your materials. You’ll need some kind of sealant for your coasters, such as Mod Podge or a clear epoxy resin. You’ll also need a brush or a sponge to apply the sealant, as well as scissors to trim any excess material. Lastly, you’ll need your design or artwork that you want to print onto the coasters.

Once you have everything prepared, it’s time to start creating your custom coasters! First, take your coaster backing and place it onto the work area. If you’re using the Printify service, you can choose from several different coaster backing options, such as cork, rubber, or crystal clear acrylic. Each type of backing has its own unique look and feel, so pick the one that best fits your desired aesthetic.

If you’re working with cork or rubber backings, I recommend giving them a quick clean with a damp cloth to get rid of any dust or debris. This will ensure that your sealant adheres properly and that there are no bubbles or bumps on the surface of your coaster. If you’re using a crystal clear acrylic backing, make sure to remove any protective film or tint that may be on it, as this can affect the clarity of your final coaster.

Next, take your design and place it onto the coaster backing. You can either use a Printify template or create your own design using graphic design software. Make sure that the design fits within the edges of the coaster and that it is centered properly. If you’re using multiple designs or photographs, you’ll need to repeat this process for each coaster.

Once your design is in place, it’s time to apply the sealant. If you’re using Mod Podge or a similar adhesive, apply a thin, even layer to the surface of the coaster. Use a brush or a sponge to smoothe out any lumps or bubbles. If you’re using an epoxy resin, follow the instructions on the packaging to properly mix and apply the resin.

After the sealant has been applied, let the coaster dry completely. This may take several hours or overnight, depending on the type of sealant you’re using. Once the sealant is dry, you can trim any excess material or edges with scissors to create a clean and finished look.

And there you have it! Your custom coasters are now ready for use. Whether you’re making them for yourself, as a gift, or for a craft project, Printify makes it easy to create personalized coasters that are both functional and decorative. So give it a try and let your creativity run wild!

Thanks to Printify, DIY coaster-making has never been easier!

Step 2

Now that you’ve gathered all the materials you need, it’s time to start working on your custom coasters. Here’s a step-by-step guide on how to make them:

Prepare the surface of the tiles by cleaning them properly. You can use a mild soap and water to wipe them down and remove any dirt or residue.
If you want to add a decorative design or photograph onto the coasters, now is the time to do it. Cut out the desired design or photograph using scissors, making sure it will fit nicely onto the tile.
Apply a thin layer of glue onto the back of the design or photograph, and then carefully place it onto the tile. Make sure it’s centered and press down gently to secure it in place. Wipe away any excess glue with a finger or a scrap piece of plastic.
Repeat steps 2 and 3 for all the coasters you’re making. You can make several with the same design or mix and match different ones.
Allow the glue to dry completely. This might take up to 24 hours, so be patient and let them sit undisturbed.
Once the glue is dry, it’s time to seal the coasters. Mix a small amount of polyurethane resin according to the instructions on the product. Usually, it involves stirring two parts of resin with one part of hardener.
Pour a little bit of the mixed resin onto the center of each tile. Use a spoon to spread it evenly, making sure it covers the entire surface. If there are any air bubbles, you can use a heat gun or a torch to gently heat the surface and make them rise to the top.
Wait for the resin to dry, which usually takes around 24 hours. During this time, make sure to keep the coasters in a dust-free environment, so they won’t get any particles stuck in the resin.
After the resin has dried, your custom coasters are almost done. There’s just one more step left – applying a layer of varnish or sealant. This will give them a beautiful smoothe finish and protect the design from scratches or fading.
Brush the varnish or sealant onto the top of each coaster, making sure you cover the entire surface. Allow it to dry completely, following the instructions on the product.
Once the varnish is dry, your custom coasters are ready to be used or gifted. They make great personalized gifts or unique additions to your home decor.

By following these steps, you’ll be able to create your own custom coasters that are not only beautiful but also practical. Have fun crafting!

Choose a Product

When it comes to making custom coasters, you have a few different options to choose from. One popular choice is to use ceramic tiles, which provide a sturdy and durable base for your coasters. Another option is to use clear resin, which allows you to create a crystal-clear finish that highlights your artwork or photos. Finally, you can also use cork or foam as the bottom layer of your coasters, providing a softer and more cushioned surface.

If you decide to go with ceramic tiles, you can easily find them at your local home improvement store. They come in various sizes, but a 4×4 inch tile is a common choice for coasters. You can either choose to leave the tile as is, or you can paint it with your preferred color using acrylic paint. If you decide to paint the tile, make sure to let it dry completely before moving on to the next step.

If you prefer the clear resin look, you will need to purchase epoxy resin for your project. Mod Podge is a popular brand that works well for this type of project. You will also need a picture or artwork that you want to use for your coasters. Printify’s custom printing services can help you with that. Remember to make sure your image is sized appropriately to fit on your coaster, typically 4×4 inches. You may need to trim or cut your image to fit, using scissors or a craft knife.

Before you apply the resin, you’ll need to make sure your tile is clean and free of any dust or debris. Wipe it down with a damp cloth and let it dry completely. If you’re using photos, you can also spray a light coat of fixative to protect them from any potential damage from the epoxy resin.

Now it’s time to mix your epoxy resin. Follow the instructions on the package carefully. Typically, you’ll need to mix equal parts resin and hardener. Stir the two parts together thoroughly, making sure there are no streaks or bubbles. If you want to add a tint to your resin, this is the time to do it. Follow the manufacturer’s instructions on how to add the tint and mix it thoroughly.

Once your resin is mixed, use a foam brush to apply a thin layer to the top of your tile. Make sure to spread it evenly, covering the entire surface. If there are any air bubbles, use a toothpick or a lighter to gently pop them. Let the first layer of resin cure for about 24 hours before applying a second layer, if desired.

If you’re using cork or foam as the bottom layer of your coasters, simply cut them to the same size as your tiles and glue them in place using strong adhesive. Make sure to center the cork or foam and press it down firmly to ensure a secure bond.

Now that your coasters are done, take a moment to admire your handiwork! These custom coasters make great gifts for friends and family. You can also make a set of them using different photos or artwork to create a mixed set. Enjoy using them in your home or giving them as thoughtful and personalized gifts.

Step 3

Once you have chosen your design and gathered all the materials, it’s time to start creating your custom coasters. This step is where the magic happens!

First, make sure your work surface is clean and clear. Lay down a plastic or scrap piece to protect the surface and avoid any messes. Then, take your square piece of the bottom backing and place it onto the work surface.

If you have a decorative or artsy scrap piece of paper or fabric, you can use it to add an extra touch to your coasters. Cut it into a square shape that is slightly smaller than the bottom backing piece, and glue it onto the center of the backing piece. This will create a beautiful background for your coaster.

Next, take your printed image or design and carefully cut it out using scissors. Make sure to leave a small border around the design so it properly fits onto the backing piece.

Now, it’s time to start assembling your coaster. Apply a thin layer of glue onto the back of the cut-out design and press it onto the center of the backing piece. Smooth out any air bubbles or wrinkles with your finger and let it dry for a few minutes.

While you’re waiting for the glue to dry, mix together 4 teaspoons of varnish with 1/8 teaspoon of water. This will create a glossy finish for your coaster. Once the glue is completely dry, use a spoon to carefully spread a thin layer of the varnish mixture over the top of the design. Make sure to evenly coat the entire surface.

Let the coaster dry for at least 24 hours before moving on to the next step. If you’re excited to see the final product, you can give it a check after 7 hours to see if it’s already dry. But we recommend waiting the full drying time to ensure the varnish has properly set.

After the drying time, you can add another layer of varnish if you like for extra shine and protection. Repeat the process of applying the varnish and letting it dry completely.

Once the coaster is done, take a moment to admire your beautiful and creative work. You now have a custom coaster that can be used as a decorative piece or a practical gift.

Here’s a quick recap of the steps:

Step 1	Choose a design and gather materials
Step 2	Cut out the backing and prepare the design
Step 3	Create the coaster with glue and varnish
Step 4	Let the coaster dry completely
Step 5	Add an extra layer of varnish if desired
Step 6	Enjoy your custom coaster!

Now that you know the step-by-step process, it’s time to get crafting and decorating. Whether you’re making these coasters for yourself or as a gift, they’re sure to be a hit. Have fun and embrace your creative side!

Apply Your Custom Design

Once you have your custom designs printed and ready to go, it’s time to apply them to your coasters.

If you’re using Mod Podge as a backing for your coasters, start by giving it a good stir. This will help eliminate any bubbles that may have formed.

Next, apply a thin layer of Mod Podge to the center of your coaster. You can use a brush or simply pour the Mod Podge directly onto the coaster and spread it around with your finger.

Take your custom design and carefully place it on top of the Mod Podge, making sure to line it up with the edges of the coaster. Gently press down to smooth out any bubbles or wrinkles.

If you’re using epoxy resin, there’s a little more prep work involved. Make sure your custom design is printed on glossy photo paper or a similar type of paper. Cut out each design and set them aside.

In a small mixing cup, combine equal parts of resin and hardener. Stir them together for about 3 minutes, making sure to scrape the sides and bottom of the cup.

Pour a small amount of the mixed resin onto the center of your coaster. Use a popsicle stick or something similar to spread the resin out towards the edges, making sure to completely cover the entire area.

Place your custom design on top of the resin, making sure it’s centered and flat. Use a popsicle stick or your finger to gently press down and remove any bubbles or wrinkles.

Let your coasters dry for at least 24 hours before moving on to the next step. This will ensure that the resin is completely dry and hardened.

Once your coasters are dry, you can add any additional decorations or embellishments if desired. Whether it’s a floral pattern, a crystal accent, or a little extra paint, get creative and make each coaster your own.

Finally, when you’re all done decorating, it’s time to seal and protect your custom coasters. Apply a thin layer of clear varnish or acrylic sealer to the entire surface of the coaster. This will give it a glossy finish and protect your design.

Your custom coasters are now ready to be enjoyed! Whether you keep them for yourself or give them as gifts, they’ll be a beautiful addition to any home.

How to Make Coasters Decorating

If you’re looking for a fun and creative way to spruce up your home decor, why not try making your own custom coasters? They’re not only functional, but they can also be a great conversation starter when guests come over!

One of the easiest ways to customize your coasters is by adding decorative elements, such as photos or prints, onto the front of the coaster. That’s right – you can use your favorite photos or even print out floral designs to make your coasters truly unique!

To get started, you’ll need a few key materials:

– Tiles (square or round)	– Mod Podge or other sealant	– Paint brushes
– Felt or other backing material	– Scissors	– Clear varnish or sealant (matte or glossy, depending on your desired finish)

Once you have your materials ready, it’s time to start decorating! Here are the steps to follow:

1. Start by cleaning the tiles to ensure that they’re free of dust or dirt. You don’t want anything getting in the way of your creative process!

2. Next, using a paint brush, apply a thin layer of Mod Podge or your preferred sealant onto the front of the tile. This will serve as the adhesive for your decorative element.

3. Carefully place your chosen photo or print onto the sealed surface of the tile. Make sure to center it and smooth out any air bubbles or wrinkles.

4. Once you’re happy with the placement, apply another layer of Mod Podge or sealant on top of the photo or print. This will help seal it in and protect it from moisture or spills.

5. Let the coaster dry completely before continuing to the next step. This may take a couple of hours, so be patient – it’ll be worth it!

6. While you’re waiting for the coaster to dry, cut out a piece of felt or other backing material that’s slightly smaller than the tile. This will provide a soft surface for your coaster to sit on and prevent it from scratching any surfaces.

7. Once the coaster is dry, apply a thin layer of clear varnish or sealant onto the back of the tile. This will help protect it and give it a finished look.

8. Finally, attach the felt backing to the back of the coaster using a strong adhesive, such as Mod Podge or a glue gun. Make sure to center it and press down firmly to ensure a secure bond.

Congratulations – you’ve just made your own custom coaster! Now you can sit back, relax, and enjoy your beautiful creations. They make perfect gifts for friends and loved ones, or you can just keep them for yourself to enjoy.

Feel free to get creative with your coaster designs – there are lots of other ideas and projects you can try! You could add decorative edges to your coasters, experiment with different prints or patterns, or even use tinted varnish to give them a more unique look.

Remember, the most important thing is to have fun and let your creativity flow. Don’t be afraid to make mistakes – that’s how we learn and discover new techniques!

So why not gather your materials, set aside some time, and get started on your coaster decorating adventure? You’ll be amazed at what you can create with just a few simple steps. Have fun and enjoy the process!

How to Make DIY Photo Coasters

If you’re looking for a fun and personalized way to display your favorite photos, making DIY photo coasters is a great project to try. Not only can you showcase your cherished memories, but these coasters also make for great homemade gifts. In this article, we’ll provide you with a step-by-step guide on how to create your own photo coasters.

Materials you’ll need:

4 ceramic or tile coasters
Acrylic paint (choose any color you like)
A paintbrush
Mod Podge or any other sealant
A printed copy of your chosen photos (make sure they fit the coaster’s size)
A pair of scissors
A foam brush
A small container for mixing
Epoxy resin (make sure it’s heat resistant)
A heat gun or torch

Step 1: Prepare the coasters

Start by cleaning the ceramic or tile coasters. Make sure they are free from any dust or debris. If needed, wipe them down with a damp cloth and let them dry completely.

Step 2: Paint the coasters

Apply a layer of acrylic paint to each coaster. You can choose a single color or create a unique design using multiple colors. Allow the paint to dry completely before moving on to the next step.

Step 3: Trim your photos

Using a pair of scissors, trim your printed photos to fit the size of the coasters. Make sure the image is centered and properly aligned.

Step 4: Apply Mod Podge

Using a foam brush, apply a thin layer of Mod Podge or any other sealant to the coaster’s surface. Carefully place your trimmed photo onto the coaster, making sure it is centered and positioned properly. Smooth out any air bubbles or wrinkles.

Step 5: Seal the photo

Apply another layer of Mod Podge or sealant on top of the photo, making sure to cover the entire surface. This will help seal the photo and protect it from any spills or moisture. Allow the Mod Podge to dry completely for a glossy finish.

Step 6: Mix and apply epoxy resin

Follow the instructions on your epoxy resin product, and mix it accordingly in a small container. Carefully pour the resin onto the coaster, making sure to cover the entire surface. Use a heat gun or torch to remove any air bubbles. Let the resin cure according to the product’s instructions.

Step 7: Repeat for the remaining coasters

Repeat steps 3 to 6 for the remaining three coasters. Once all the coasters are done, let them cure for the recommended time.

Step 8: Enjoy your DIY photo coasters

Once the resin has cured, your DIY photo coasters are ready to use or give as gifts. They not only serve as a beautiful decorative addition to any surface but also provide a great way to display your favorite memories.

Now that you’ve learned how to make DIY photo coasters, you can create unique and personalized gifts for your loved ones or add a touch of personalization to your own home decor. Have fun experimenting with different photos, designs, and colors, and enjoy the process of creating beautiful and functional coasters!

Thanks to Dana from Printifys for the inspiration and tutorial!

Step 1: Paint the edges of the tiles

To begin creating your custom coasters, the first step is to paint the edges of the tiles. This will give them a finished look and make them more visually appealing.

Here’s what you’ll need:

Three or more white tiles
Acrylic paint in the desired colors
A paintbrush
An old catalog or mat to protect your work surface
Felt or cork backing
Scissors
Glue

Start by cleaning the tiles to ensure that they are free from any dirt or debris. Once they are clean and dry, place them on the catalog or mat to prevent the paint from getting on your work surface.

You can choose to paint the edges of the tiles with a single color or use multiple colors to create a more unique and creative design. If you’re going for a floral theme, for example, you might paint each tile with a different floral pattern.

Take your paintbrush and dip it into the acrylic paint. Start by painting the top edge of each tile, using long, smooth strokes. Make sure to cover the entire edge and avoid leaving any white areas. If needed, you can apply a second coat of paint to achieve the desired color intensity.

Once the edges are painted, let the tiles dry completely. This may take several minutes, depending on the type of paint used. You can read the paint label for more specific drying times.

To protect the paint and give it a glossy or matte finish, you can apply a layer of varnish or polyurethane on top. This will also make the coasters easier to clean and will prevent the paint from chipping or fading over time.

Next, cut pieces of felt or cork backing to fit the bottom of each tile. Apply glue to the back of the painted tile and press the corresponding piece of felt or cork onto it. Press firmly with your finger to ensure that the backing sticks properly.

Wait for the glue to dry before moving on to the next step. Once the backing is securely in place, your painted-edge custom coasters are ready to be used or gifted!

Now that you’ve completed Step 1, you can move on to the next steps to complete your DIY coaster project.

Step 2 Trim your photos down for your DIY photo coasters

Once you have gathered all the materials you need for your DIY photo coasters, it’s time to start working on the pictures you want to use. Here’s a simple step-by-step guide on how to trim your photos down to fit on the coasters:

Cut your chosen photographs to the desired size. A good size for a coaster is usually a square with dimensions of 4 inches by 4 inches.
Make sure the picture fits nicely within the square area of the coaster. You can trim the edges if necessary.
Wipe the surface of the tile clean to ensure there is no dust or residue.
Apply a thin layer of Mod Podge or any other kind of decoupage glue to the back of the picture.
Place the picture carefully onto the center of the coaster, making sure it is aligned correctly.
Press down gently on the picture and smoothe out any bubbles or wrinkles with a rolling pin or something similar.
Leave the glue to dry for about 10 minutes.

Printify's custom coaster product

While you’re waiting for the glue to dry, it’s a good time to repeat the process with the other coasters you want to make. Once the glue is dry, check to make sure the picture is securely attached to the coaster. If there are any parts that are not sticking well, apply a bit more glue and press down. It’s better to be safe than sorry!

Next, you’ll want to protect the picture and give it a glossy finish. Mix 6 parts resin with 1 part hardener according to the instructions on the resin packaging. Pour the mixture onto the center of the coaster, making sure it spreads evenly to cover the entire surface. Use a teaspoon to help spread the resin if needed.

Let the resin dry for at least 24 hours or as directed on the packaging. Once it’s dry, check for any bubbles that might have formed. You can use a heat gun or blow dryer (on low heat) to gently blow over the surface and remove any bubbles.

When everything is dry and perfect, you can add a decorative felt or cork bottom to the coaster to protect your furniture. Simply cut out a square shape from a piece of felt or cork, slightly smaller than the coaster, and glue it onto the back. This will also provide a better grip.

Now you have your own custom photo coasters, ready to be used or given as gifts. Repeat the process with your other favorite photographs and create a whole set of unique coasters!

Step 3: Glue photos to center of tile

Once you’ve properly prepared the tiles and have your foam brushes, floral foam, and acrylic varnish ready, it’s time to move on to the next step. In this step, you will be gluing the photos onto the center of the tile.

Here’s how to do it:

Choose the photo or design you want to use for your coaster. You can either print it at home or have it printed professionally by a service like Printify.
If your photo is larger than the tile, carefully cut it down to the appropriate size.
Place the photo or design in the center of the tile. Make sure it is aligned properly and that there are no edges sticking out.
Apply a thin, even layer of glue to the back of the photo. You can use a crystal clear glue for a neat and clean finish.
Press the photo onto the center of the tile, making sure to smooth out any air bubbles or wrinkles. Wipe away any excess glue that may have seeped out.
Leave the tile to dry completely. This might take around 24 hours, so be patient.
Once the glue is dry, check if the photo is securely glued in place. If there’s any lifting or movement, apply more glue to the area and press down firmly.
After the glue has set and the photo is secure, it’s time to protect it with varnish. Mix one part water with four parts acrylic varnish in a small container. Stir well.
Using a foam brush, apply a thin coat of the varnish mixture to the front of the tile, covering the photo and creating a protective layer.
Allow the varnish to dry completely before repeating the process for up to three more coats. Each coat should be applied in different directions to ensure full coverage and a smooth finish.
Once the final coat has dried, your custom coaster is complete! Enjoy using it or give it as a personalized gift to someone special.

There’s always something satisfying about making your own custom coasters. Whether you choose to decorate them with photos, designs, or even decorative arts and crafts, these unique creations make great home accents or personalized gifts for friends and family.

Read on to the next step to learn how to add a protective finish to your coasters.

Step 4 Prepare the resin

Now that you have your design ready, it’s time to prepare the resin. Here’s what you’ll need:

A clear epoxy resin kit
A mixing cup and stir stick
A heat gun or a blow dryer
A torch or a lighter

Before you begin, make sure to read the instructions on the resin kit carefully. Different products might have slightly different mixing ratios and curing times, so it’s important to follow the instructions provided.

Start by placing a drop cloth or some newspapers on your work surface to protect it from any spills. Then, take your resin and hardener bottles and shake them well to ensure they’re thoroughly mixed.

Next, measure your resin and hardener according to the ratios specified in the instructions. Usually, this is a 1:1 ratio, which means equal amounts of resin and hardener. Pour the measured amounts into a mixing cup.

Using a stir stick, gently mix the resin and hardener together. Be careful not to introduce too many air bubbles into the mixture. A slow and steady stirring motion will help prevent this.

Once the resin and hardener are thoroughly mixed, you can add in any additional elements like glitter, dried flowers, or small trinkets. You can get creative here and add anything you like to customize your coasters.

Take a deep breath and get excited, because it’s almost time to pour your resin mixture into the coaster molds! But before you do, make sure the coaster molds are clean and dry. If there’s any moisture, it might interfere with the curing process of the resin.

If you used acrylic tiles as your coaster molds, there’s a chance that the resin mixture might stick to the bottom of the mold. To prevent this, you can apply a thin layer of mold release or a sealant spray beforehand. This will make it easier to remove the coasters once they’re dry.

When you’re ready, pour the resin mixture into the coaster molds, filling them up to the top. Use a heat gun or a blow dryer to smoothe out the surface and pop any air bubbles that might have formed.

Now it’s time to add your design! Place your custom cut picture or photograph face down onto the resin surface. Press it gently to adhere it to the resin. Make sure the image is centered and level.

If you have several coasters to make, repeat this process for each one. It’s always a good idea to check the resin manufacturer’s instructions for the recommended curing time, which is usually around 24 to 48 hours.

Once your coasters are dry, you can apply a thin layer of varnish or sealant over the resin surface for added protection and a glossy finish. Wait for the varnish to dry completely before using or gifting your custom coasters.

There you have it! With these 8 steps, you’ve learned how to make custom coasters using resin. Now you can create beautiful and unique coasters for your own home or as gifts for your loved ones. The possibilities are endless!

Step 5: Spoon out resin onto your DIY photo coasters

Now comes the fun part! Take your clear epoxy resin and carefully spoon it out onto your DIY photo coasters. Make sure to spread it evenly over the surface of each coaster, covering the entire photo and any edges. You may need to use a paintbrush or your finger to help spread the resin and cover all areas.

You can choose to tint your resin with a little bit of acrylic paint if you want to add a touch of color to your coasters. Just mix a small amount of paint into the resin before spooning it onto your coasters. Be careful not to add too much paint, as it can affect the transparency of the resin.

The resin will start to self-level and fill in any small imperfections as it dries, so don’t worry if there are any tiny bubbles or unevenness at this stage. However, if there are any large bubbles, you can use a heat gun or a straw to carefully blow on the surface and pop them.

Once the resin is spread evenly, continue working on each coaster until all of them are covered. Take your time and be careful not to smudge or disturb the photographs while working with the resin.

Now, set your DIY photo coasters aside in a clean and dust-free area to dry. It usually takes around 24 hours for the resin to cure completely, but check the manufacturer’s instructions on your resin product for specific drying times.

Remember, if you’re using Mod Podge as a sealant for your photographs, be sure to let the Mod Podge dry completely before applying the resin. This will prevent any moisture from getting trapped between the Mod Podge and resin layers.

Once the resin has dried, you’ll have beautiful crystal-clear coasters showcasing your favorite photographs or designs. The resin will give them a glossy and professional finish, and they’ll be ready to use or give as gifts!

Thanks for following along with this tutorial on how to make custom coasters. Now that you have the basic steps down, feel free to get creative and try out different ideas for your DIY coasters. There are so many possibilities, and crafting your own coasters is a great way to personalize your home or create unique gifts for friends and family!

Step 6: Repeat for each tile

Now that you have completed one coaster tile, it’s time to repeat the process for the remaining tiles.

Open the Mod Podge, the product that is being used to seal and secure the designs on the coaster tiles. Cover the entirety of the tile with a thin coat of Mod Podge using a foam brush or a sponge brush.

Next, find the desired photo or design to be used for the coaster. If you are using a printed photo, make sure it is scaled to fit within the tile. Cut the photo or design to fit the tile using scissors or a paper cutter.

If you choose to include multiple designs, you can cut out various shapes or use different scrapbooking paper to create a collage effect.

Once you have your design or photo ready, apply a thin coat of Mod Podge to the back of it and carefully place it onto the tile, making sure to smooth out any bubbles or wrinkles with your finger.

Leave the tile to dry, around 20-30 minutes, before applying a second coat of Mod Podge over the top of the design. It is important to apply multiple coats as this will ensure a good seal and make the coaster more durable.

If you are using dimensional designs, like dried flowers or decorative elements, make sure to place them in the desired position before applying the final coat of Mod Podge.

Wait for the tile to dry completely before moving on to the next step. This will generally take around 24 hours.

Once the Mod Podge is dry, apply a coat or two of polyurethane varnish to seal and protect the coaster. This step is recommended to give the coaster a nice, finished look and to make it water and heat resistant.

After the varnish has dried, check the edges of the coaster tiles to make sure everything is sealed properly. If any areas are missed, use a small brush or sponge to apply another coat of varnish.

Now you have repeat this process for each tile until all of your coasters are complete. You can make as many sets as you like, experimenting with different designs, photos, or scrapbooking papers.

Thanks to Printify’s custom printing products, you have lots of creative options for making personalized coasters as gifts or for your own home decor.

Remember to have fun and be creative while decorating your coasters. There are no wrong choices, and you can always try different techniques or materials to achieve the desired result.

Step 7: Get rid of the little bubbles

When crafting custom coasters, those pesky little bubbles can sometimes appear on the surface of your project. But don’t worry, there’s a simple solution to get rid of them!

First, make sure your work area is clean and free of any dust or debris. You don’t want anything getting in the way of your perfectly smooth coasters!
If you haven’t already, trim your photos or decorative paper to fit the top of your coaster tiles. Make sure they are properly aligned and centered.
Next, mix together 2-3 teaspoons of Mod Podge with a few drops of water. Stir well until the mixture has a smooth consistency.
Using a sponge brush or foam brush, apply a thin coat of the Mod Podge mixture to the top of each coaster tile. Make sure to cover the entire surface evenly.
Once the Mod Podge dries for about 10-15 minutes, take out your epoxy resin. Carefully pour a small amount onto the center of each coaster tile. Use a spoon or your finger to spread it out towards the edges, making sure to cover the entire surface.
If you notice any bubbles forming, you can use a heat gun or a blow dryer on a low setting to gently heat the surface. This will help the bubbles rise to the top and pop on their own. Be careful not to heat it for too long or else the epoxy may become too hot and ruin the photo or decorative paper.
For a better result, you can also use a torch or a heat gun to quickly pass over the top of the epoxy to smoothe out any bubbles. Keep the flame or heat source moving at all times to prevent any damage to the surface.
Let the epoxy dry and cure according to the instructions provided by the manufacturer. This usually takes around 24-48 hours, but it’s always best to check the drying time mentioned on the product label.
Once the epoxy is fully dry, you can inspect your custom coasters and make sure there are no bubbles left behind. If you do find any, you can use a clean, lint-free cloth or a soft sponge to gently wipe away the bubbles.
Now, your custom coasters are done! They should have a smooth, crystal-like surface that looks professional and perfect for any home or office. You can give them as gifts, use them yourself, or even sell them at a local craft fair or online marketplace.

By following these steps, you can create custom coasters with beautiful photos or decorative designs that are smoothe and bubble-free. This technique can be applied to many other DIY projects, so be sure to read up and learn more about epoxy resin and its uses in crafting.

Step 8: Wait for them to dry

After you have applied all the coats of clear acrylic spray and the design on top, you need to wait for the coasters to dry completely. This step is crucial to ensure that the coasters are smoothe and ready to use.

It’s important to note that the drying time can vary depending on the type of acrylic spray you used and the thickness of the coats. Generally, it takes about 24 hours for the coasters to dry completely, but it’s always better to follow the instructions on the spray can.

While waiting for the coasters to dry, make sure to lay them flat on a clean and dry surface. Avoid touching or moving them too much to prevent any smudging or damage to the design. It’s also a good idea to cover them with a clean cloth or paper towel to protect them from dust and dirt.

Once the coasters are completely dry, you can remove the backing and admire your beautiful custom coasters. Now you can enjoy using them at home or give them as a unique and personalized gift to someone special.

Step 9: Glue felt to the bottom of your tile coasters

Now that your tile coasters are almost done, it’s time to add a protective backing to ensure they don’t scratch any surfaces. Gluing felt to the bottom of each coaster will provide a soft and cushioned surface.

Here’s how to do it:

Take a sheet of felt that is the same size as your coaster. You can find felt at arts and crafts stores or online.
Using scissors, trim the felt to be slightly smaller than your coaster. This will ensure that the edges of the felt don’t stick out when the coaster is finished.
Apply a small amount of craft glue or epoxy adhesive to the bottom of the coaster. You can use a paintbrush or a small stick to spread the glue evenly.
Place the felt onto the glue, making sure it is centered and aligned with the edges of the coaster.
Gently press down on the felt to ensure it sticks to the coaster properly. Smooth out any wrinkles or bubbles.
Repeat this process for each coaster you have made.
Let the glue dry completely before moving or using the coasters. This may take several hours or overnight, depending on the type of glue used.
Once the glue is completely dry, check the edges of the coaster to make sure the felt is firmly attached. Trim any excess felt if necessary.
Your custom tile coasters are now complete! They are ready to protect your surfaces in style.

This simple step of adding felt to the bottom of your coaster not only enhances their functionality but also adds a professional touch. The felt will prevent any scratching or sliding when used on different surfaces, making them an ideal gift or addition to your own home.

Now that you have finished all the steps, take a moment to admire your work. You’ve created your own DIY coasters that are both practical and aesthetically pleasing. The possibilities for design and creativity are endless, so don’t be afraid to experiment with different materials and techniques!

Step 10 Enjoy your photo coasters

Once the epoxy or resin has completely dried, you can now enjoy your custom photo coasters. These personalized coasters can be great for your home or as a gift for someone special. Here are some ideas on how to make the most out of your photo coasters:

1. Choose your favorite photographs or images to use for the coasters. You can print out copies of your photos or find scrapbook paper with designs that you like.

2. Cut the photographs or scrapbook paper into square shapes that will fit perfectly on top of the coaster. Use scissors with a sharp edge for a clean cut.

3. Prepare your workspace and make sure it’s clean. Wipe the surface of the coaster to remove any dust or dirt that might interfere with the adhesive or sealant.

4. Take the mixed epoxy or resin and pour a little bit onto the front of the coaster. Use a spoon or a teaspoon to spread the epoxy evenly across the surface.

5. Place your cut photograph or scrapbook paper onto the coaster, making sure it’s centered and aligned. Gently press it down to remove any air bubbles that might have formed.

6. Wait for the epoxy or resin to dry. This can take anywhere from a few minutes to several hours, depending on the brand and the desired level of hardness.

7. Once the epoxy or resin is completely dry, apply a second coat to seal the photograph or scrapbook paper. This will give it a glossy and more durable finish.

8. Leave the coaster to dry and cure for at least 24 hours. This will ensure that the epoxy or resin fully hardens and the photograph or scrapbook paper is securely sealed.

9. After the epoxy or resin has cured, check the edges of the coaster for any excess material. You can use a craft knife or sandpaper to remove any rough edges or imperfections.

10. Your custom photo coasters are now ready to be used! These unique and personalized pieces will protect your tables from any spills and add a touch of your own style to your home.

Always remember to read and follow the instructions on the epoxy or resin product you’re using, as different brands and types may have slightly different curing times and application techniques.