Complete Guide to Creating Stunning Resin Coasters for Your Home Decor

If you’re looking for a fun and creative DIY project, making resin coasters might be just what you need. Resin coasters are not only functional but can also be a beautiful addition to your home decor. Whether you’re a beginner or an experienced crafter, this step-by-step guide will help you create stunning coasters that you’ll love.

Before you start, make sure you have all the materials and supplies listed below. You can purchase resin and its hardener, as well as other specific supplies like molds and pigmented flakes, from your local craft store or online. Gather everything you need and set up your workspace in a well-ventilated area.

Step 1: Prepare the Molds

Choose the molds you want to use for your coasters. You can get creative and use different shapes and sizes. Make sure the molds are clean and free of dust or any other debris. If needed, wipe them down or wash them with soap and water. If the molds are made of silicone, use a sealant spray to prevent the resin from sticking.

Step 2: Measure and Mix the Resin

Follow the instructions on the resin package to measure the correct amounts of resin and its hardener. Using a measuring cup, pour the resin and hardener into a mixing container. Use popsicle sticks or wooden sticks to stir the mixture thoroughly. Stir slowly to minimize the formation of bubbles.

Step 3: Add Pigmented Flakes or Embed Objects (Optional)

If you want to add a touch of color or embed objects like flowers or gold flakes, now is the time to do it. Pour a small amount of the resin mixture into a separate container and add the desired pigment or object. Stir gently to ensure an even distribution. You can also pour multiple layers, allowing each to partially cure before adding the next.

Step 4: Pour the Resin into the Molds

Once your resin mixture is ready, carefully pour it into the molds. Make sure to fill each mold evenly. To remove any bubbles that may have formed, you can use a torch or simply blow gently on the surface. If you notice any fingerprints or dust particles, carefully remove them with a toothpick or a clean cloth.

Step 5: Let the Resin Cure

After pouring the resin, cover the molds with a clear lid or a piece of cardboard to keep dust out. Place the molds on a level surface and let the resin cure for the time specified on the package instructions. This can take anywhere from a few hours to several days, depending on the type of resin you’re using.

Step 6: Remove the Coasters from the Molds

Once the resin has completely cured, gently press on the back of each mold to release the coasters. If they don’t come out easily, try flexing the mold or placing it in the freezer for a few minutes to loosen the resin. Be careful not to use excessive force, as this can damage the coasters.

Step 7: Apply a Protective Finish

To make your coasters more durable and heat-resistant, apply a sealant or resin finish. This will also give them a glossy and professional look. Follow the manufacturer’s instructions to apply the sealant evenly and allow it to dry completely.

There you have it! Your beautiful resin coasters are now complete and ready to be used or gifted. Enjoy showing off your unique creations to your friends and family, and don’t be surprised if they start asking you to make some for them too!

About the Author:

This article was written by [Author’s Name], a DIY enthusiast who loves experimenting with various crafts and materials. [Author’s Name] enjoys sharing their passion with others and helping them discover their creative side. If you have any questions or want to learn more about resin coasters, feel free to reach out to [Author’s Name] on [social media platform].

DIY Resin Coasters With Pressed Dried Flowers

If you’re a creative person who loves to make your own unique home decor, these DIY resin coasters with pressed dried flowers are a great project for you. Not only do they add a touch of natural beauty to your home, but they also protect your furniture from water stains and damage. Follow the step-by-step instructions below to make your own personalized resin coasters.

Step 1: Choose Your Pressed Dried Flowers

Start by selecting the dried flowers you want to embed in the resin coasters. You can either press and dry your own flowers, or purchase pre-pressed dried flowers from a craft store. Make sure to choose flowers that are flat and will adhere well to the resin.

Step 2: Prepare Your Workspace

Find a well-ventilated area to work in, as working with resin can produce strong fumes. Lay down a piece of cardboard or a plastic sheet to protect your work surface.

Step 3: Measure and Mix Resin

Follow the instructions on the resin packaging to measure the specific amounts of resin and hardener needed. Use a clean, dry measuring cup and stir the two components together according to the instructions. Stir slowly to avoid creating air bubbles.

Step 4: Add Pigmented or Clear Resin

If you want to add color to your resin, this is the time to do it. You can use pigmented resin or add a few drops of acrylic paint to the mixture. Stir gently until the color is evenly distributed.

Step 5: Pour Resin Into Molds

Pour the resin mixture into your coaster molds, filling them about three-quarters full. Use a handheld torch or a heat gun to remove any air bubbles that rise to the surface.

Step 6: Press Dried Flowers Into Resin

Once the resin has hardened slightly but is still sticky to the touch (usually within 15-30 minutes), carefully press your dried flowers into the resin. Arrange them in a pleasing pattern or place one in the centre for a focal point. Use a toothpick or another small tool to position the flowers if needed.

Step 7: Allow Resin to Fully Cure

Set your resin coasters aside in a well-ventilated area and allow them to cure fully. The curing time will vary depending on the brand of resin you used, so be sure to check the instructions on the packaging. Once the coasters are fully cured, they will be hard and ready to use.

When the coasters are fully cured, carefully remove them from the molds. If there are any rough or uneven edges, you can use sandpaper or a small file to smooth them out. Wipe away any dust or fingerprints with a clean cloth.

Whether you choose to make these resin coasters as a decorative piece of art or as a practical way to protect your furniture, they are sure to add a touch of beauty to your home. Get creative with the flowers you choose and enjoy the process of making something unique with your own hands.

Supplies

Before you can start making resin coasters, you’ll need to gather the following supplies:

• A safety mask or respirator to protect yourself from any harmful fumes
• A well-ventilated workspace to work in
• An art resin, which you can purchase online or at a local art supply store
• A hardener, which usually comes with the art resin
• A plastic mixing cup or container
• A stir stick or wooden popsicle stick
• A heat gun or torch to remove any bubbles in the resin
• A silicone or silicone mold to shape your coasters
• A selection of flowers, stones, or other objects to embed into the resin (optional)
• A clean, dust-free surface for your workspace, like a plastic cutting board or silicone mat
• Safety gloves to protect your hands from the resin
• A mask or face shield to protect your face and eyes from any splashes of resin
• A cloth or paper towel to clean up any spills or drips

Make sure to follow the detailed instructions provided with your art resin and hardener, as the ratios and mixing times may vary depending on the brand. You’ll typically need to mix equal amounts of both the resin and hardener to create the mixture.

If you want to add color to your coasters, you can mix in a small amount of pigmented resin or paint.

Once you have all your supplies ready, you can proceed with the preparation and making of your resin coasters.

Preparation: Safety Precautions

Before you get started on your DIY resin coasters, it’s important to take some safety precautions to ensure a good and safe working environment. Here are a few steps to follow:

1. Thoroughly read the instructions: Familiarize yourself with the instructions and make sure you understand all the steps involved in the process. This will help you avoid any mistakes or accidents.

2. Gather all the materials: Make sure you have all the materials needed for making resin coasters. This includes the resin, hardener, mixing sticks, measuring cups, and any additional pigments or embellishments you want to use.

3. Keep your workspace clean: Clear your workspace and ensure it is free of dust, debris, or any other objects that may interfere with the resin curing process.

4. Protect yourself: Wear protective gloves and clothing to avoid any direct contact with the resin. It’s also recommended to wear safety goggles and a mask to protect yourself from any fumes or particles.

5. Ventilation: Ensure that your work area is well-ventilated. If you’re working indoors, open windows or use a fan to circulate the air and prevent the buildup of fumes.

6. Safety with heat: When using a heat source, like a guntorch, to remove any bubbles from the resin, make sure to use it with caution. Keep the flame away from any flammable objects and be mindful of your workspace and surroundings.

7. Sealant and measuring: If you’re planning to embed objects like dried flowers or a leaf, make sure they are thoroughly dried and sealed before placing them in the resin. Use a clear, hard sealant to prevent any discoloration or material breakdown in the resin.

8. Mixing and stirring: When mixing the resin and hardener, be sure to follow the manufacturer’s instructions and mix them together thoroughly. Use a clean stirring stick and stir slowly to minimize the introduction of air bubbles.

9. Work with caution: While working with resin, be mindful of any spills or drips. Clean them up immediately to prevent accidents or damage.

10. Allow proper curing time: Once your resin coasters are complete, set them aside in a dust-free area and allow them to cure for the recommended time specified by the manufacturer. Avoid touching or moving them until they are fully cured.

By following these safety precautions, you can enjoy a hassle-free and safe resin coaster-making experience. Remember to always prioritize your safety while indulging in your creative DIY projects!

How to Pour Resin Coasters – Step by Step

When it comes to creating beautiful resin coasters, proper preparation and technique are key. Follow these step-by-step instructions to ensure your coasters turn out perfect every time:

Step	Instructions
1	Gather all the necessary supplies, including resin, hardener, molds, pigmented dyes, gold leaf or any other materials you’d like to embed in the coasters.
2	Ensure you have a well-ventilated workspace and take necessary precautions to protect yourself. Wear gloves and cover your work surface with cardboard or a plastic tablecloth.
3	Measure the resin and hardener according to the specific instructions listed on the packaging. Mix the two components together thoroughly for the recommended amount of time.
4	If using pigmented dyes, add them to the resin mixture and stir gently to evenly distribute the color.
5	Pour the resin mixture into each coaster mold, filling it up to the desired level.
6	If you’d like to include any embedded materials like flowers or gold leaf, gently press them into the resin mixture using a toothpick or small stick.
7	Use a handheld torch or heat gun to remove any bubbles that may have formed on the surface of the resin. Move the flame quickly and evenly over the surface of each coaster.
8	Once the resin has dried and hardened (check the packaging for the recommended curing time), remove the coasters from the molds. They should pop out easily.
9	If desired, seal the coasters with a clear sealant to give them a glossy finish and extra protection.
10	Clean up any spills or drips with a clean cloth or paper towel before the resin fully dries.
11	Allow the coasters to fully cure and harden in a dust-free and temperature-controlled environment. This may take several days, so be patient.
12	Once the coasters are completely dry, they are ready to be used or gifted to someone you love.

By following these step-by-step instructions, you can create stunning resin coasters that showcase your artistic talent and creativity. Whether you’re a DIY enthusiast or aspiring artist, this technique is a great way to express yourself and add a touch of luxury to your home decor. Have fun and enjoy the process!

Instructions

When it comes to making resin coasters, there are a few simple steps you need to follow to ensure a successful and beautiful result:

Step 1:	Gather all the supplies you’ll need, including the resin, hardener, mixing tools, silicone mold, and any objects or flowers you’d like to add to your coasters.
Step 2:	Prepare your work area by covering it with a drop cloth or cardboard to protect the surface.
Step 3:	Ensure that your work area is well-ventilated. Resin fumes can be harmful, so open a window or use a fan if needed.
Step 4:	Measure the appropriate amount of resin and hardener using measuring cups or a digital scale. Follow the instructions provided on your resin kit to get the right ratio.
Step 5:	Mix the resin and hardener together in a cup. Use a stirring stick or popsicle stick to thoroughly mix them until they are evenly combined.
Step 6:	If using flowers or any other object, place them in the silicone mold. You can arrange them as you like, making sure to leave enough space between them for the resin to flow.
Step 7:	Gently pour the mixed resin into the silicone mold, making sure to cover the flowers or objects completely.
Step 8:	Use a torch or heat gun to remove any bubbles that may have formed on the surface of the resin. Gently pass the flame over the surface, being careful not to get too close and burn the resin.
Step 9:	Allow the resin to cure for the recommended time. This can range from a few hours to a full day, depending on the brand and type of resin used.
Step 10:	Once the resin has cured, carefully remove the coasters from the mold. You may need to gently bend the silicone to pop them out.
Step 11:	Check the coasters for any missed bubbles or imperfections. If there are any, you can use a torch to zap them and make the surface smooth and clear.
Step 12:	If desired, you can add a layer of clear resin on top of the coasters to give them a glossy finish.
Step 13:	Allow the coasters to fully cure and dry. This may take another few hours or overnight.
Step 14:	Your resin coasters are now complete! Enjoy using them to protect your furniture or give them as a gift to someone you love.

With these instructions, you’ll be able to create beautiful resin coasters that are not only functional but also a piece of art. Don’t be afraid to experiment with different techniques and materials to create coasters that reflect your personal style and taste.

Gather Materials

Before you begin making resin coasters, it’s important to gather all the supplies you will need. Ensure that you have the following materials listed below:

1. Resin: Choose a clear and high-quality resin for your coasters. It’s important to thoroughly read the instructions and temperature guidelines on the resin to ensure proper curing.

2. Pigmented Dye or Mica Flakes: If you want to add some color to your coasters, you’ll need pigmented dye or mica flakes. Choose the colors you love and make sure to mix them evenly into the resin.

3. Mixing Tools: You’ll need a stirring stick or wooden stick to blend the resin and pigment together. Ensure that the mixing tools are clean and free from any dust or debris.

4. Molds: Choose a suitable mold for your coasters. You can use silicone molds or various other shapes like a natural object, such as a flower or a piece of wood.

5. Heat Gun/Torch: To remove any bubbles that may form during the pouring process, you’ll need a heat gun or a torch. Be cautious and watch for any flammable materials around the working area.

6. Safety Precautions: When working with resin, it’s important to take safety precautions. Use gloves to protect your hands and ensure that you have good ventilation to avoid inhaling any fumes.

Once you have gathered all the necessary materials, you can proceed with the next steps in creating your DIY resin coasters.

Measure Resin and Hardener

Before you begin mixing the resin and hardener, it’s important to ensure that you have the correct measurements. The ratio of resin to hardener will vary depending on the brand and type of resin you’re using, so be sure to check the instructions provided by the manufacturer.

When measuring the resin and hardener, make sure you have a clean and dry workspace. It’s also important to protect yourself by wearing safety gloves, goggles, and a mask, as resin can be toxic and the fumes can be harmful if inhaled.

To measure the resin and hardener, you can use either a handheld scale or measuring cups. If you’re using a scale, place a container on the scale and press the “tare” button to zero out the weight. Pour the resin into the container until you reach the desired amount. Then, repeat the process with the hardener, making sure to pour an equal amount as the resin.

If you’re using measuring cups, you can pour the resin and hardener into separate cups and then pour them into a single container. Make sure to pour slowly and carefully to avoid any spills or waste. You can also use a stir stick to scrape any resin or hardener that may have been missed.

Once you have measured the resin and hardener, you can pour them into another clean container for mixing. Use a slow and steady hand to pour the resin and hardener evenly, making sure not to pour too fast or create any bubbles.

To ensure that the resin and hardener are thoroughly mixed, you can use a stir stick or a handheld mixer. Mix the two components together until they are well combined and the mixture appears clear. Avoid mixing too vigorously, as this can introduce even more bubbles into the mixture.

After mixing the resin and hardener, you can prepare your molds or base for pouring. Make sure that the molds or base are clean and dry. If you’re using silicone molds, you may need to secure them to a rigid surface, such as a piece of cardboard or wood, to ensure that they don’t warp or bend when the resin is poured.

Before pouring the resin and hardener into the molds, it’s a good idea to have a few pieces of cork or cloth on hand. You can use these to prop up your molds at an angle, which will allow any bubbles to rise to the surface and pop. This technique is known as “risers” and can help prevent the formation of bubbles in your finished piece.

Once your molds or base is prepared, you can start pouring the resin and hardener mixture. Pour slowly and evenly, making sure to fill the molds or cover the base completely. If you’re using molds with different compartments, make sure to pour the mixture into each compartment equally.

After pouring the resin and hardener, it’s important to check for any bubbles or imperfections in the surface. You can use a torch or heat gun to carefully heat the surface of the resin, which will help to pop any bubbles and create a smooth finish. Be sure to keep the torch or heat gun moving to avoid scorching the resin.

Allow the resin to cure according to the manufacturer’s instructions. This can take anywhere from a few hours to a few days, depending on the type of resin you’re using. During the curing process, make sure that the resin is in a well-ventilated area and is not disturbed. You’ll also want to watch for any dust or debris that may settle on the surface of the resin, as this can create imperfections.

When the resin is completely cured, you can remove it from the molds or base and admire your finished piece. If there are any fingerprints or imperfections on the surface, you can lightly sand it down with fine-grit sandpaper. You can also seal the surface of the resin with a clear gloss or varnish if desired.

Now that you know the step-by-step process of measuring and preparing resin and hardener, you’re ready to dive into the world of resin coasters!

Stir Gently

Once you have your materials and supplies ready, it’s time to prepare the resin mixture for pouring into the molds. This step is crucial to ensure that your coasters turn out beautifully without any bubbles or imperfections.

First, choose a clean and dust-free surface to work on, preferably covered with a cloth or cardboard to protect it from any accidental spills. This will also make cleanup easier later on.

Next, carefully measure out equal amounts of the resin and hardener using the measurements listed on their respective bottles. Make sure to follow the instructions thoroughly for the best results. It’s also important to keep in mind the temperature of your workspace – too cold and the resin may not cure properly, while too hot can cause it to cure too quickly.

Once you have the resin and hardener ready, pour them into a mixing cup or container. Use a wooden stick or popsicle stick to gently stir the two components together. Be sure not to stir too vigorously as this can introduce air bubbles into the mixture.

If you would like to add any additional elements such as dried flowers or gold flakes, now is the time to do so. Make sure that these items are clean and free from any dust or debris. Pressed flowers or dried leaves can be a beautiful addition to your coasters, adding a touch of nature to your resin art.

As you stir, you’ll notice the resin mixture starting to come together and thicken slightly. This is a sign that the resin and hardener have combined properly. Be careful not to stir for too long, as it can cause the resin to heat up and cure faster than desired.

Once your mixture is well combined, it’s time to begin pouring it into the coaster molds. Depending on the molds you’ve chosen, you may need to place a cork or base under them to ensure that they stay level and stable during the pouring process.

Slowly and carefully pour the resin mixture into each mold, making sure to cover the entire surface evenly. You can use a handheld torch or a heat gun to gently pass over the surface of the resin to remove any air bubbles that may have formed during the pouring process.

Allow the resin to cure and harden according to the instructions provided on the resin packaging. This can take anywhere from a few hours to overnight, depending on the brand and type of resin you’re using.

Once the resin has fully cured, you can carefully remove the coasters from their molds. Check each piece thoroughly for any missed bubbles or imperfections. If there are any, you can sand them down using fine-grit sandpaper or apply a second layer of resin for a more smooth and glossy finish.

Now that you know how to stir the resin mixture properly, you can confidently move on to the next step of creating your own unique resin coasters.

Pour Half

Once you are fully prepared and have gathered all the necessary supplies, it’s time to start pouring the resin into your molds.

Before you begin, make sure to measure the resin and hardener in equal amounts using a measuring cup or scale. This is important to ensure an even cure.

Place the molds onto a flat and level surface, like a cardboard or wood board, to keep them stable. If you want to add any natural or decorative pieces, like dried flowers or gold leaf flakes, now is the time to do so.

When you’re ready to begin, gently pour half of the resin mixture into each mold. Start pouring from the centre and allow the resin to spread evenly. You can use a popsicle stick or a torch to help remove any air bubbles that may come to the surface.

Once half of the resin is poured, make sure to check for any missed spots or fingerprints on the molds. Use a cloth or your finger to gently clean off any imperfections.

Now, let the resin cure and set. Follow the specific instructions on your resin packaging for the recommended curing time.

It’s important to seal your work area and wear safety gloves when working with resin. Make sure to keep the room well-ventilated as well.

Once the resin is fully cured and hardened, you can carefully remove the coasters from the molds. If they are stuck, you can gently flex the molds or tap them on the side to help release the coasters.

Check your coasters for any rough edges or imperfections. You can use sandpaper or a sealant to smooth out the edges and give them a finished look.

Now, your resin coasters are complete and ready to be used or gifted! Enjoy your creative and detailed DIY project.

Add Gold Leaf

Adding gold leaf to your resin coasters can create a stunning and luxurious effect. Here’s how to do it:

• Start by making sure your work area is clean, well-ventilated, and free from dust.
• You will need some gold leaf flakes, a clear resin mixture, and your completed resin coasters.
• Gently press the gold leaf flakes onto the surface of the coaster using a clean, dry finger or a soft brush. Be careful not to press too hard and disturb the resin underneath.
• Make sure the gold leaf is evenly distributed and covers the desired areas. You can use a handheld fan to blow away any excess flakes.
• Allow the resin to cure thoroughly according to the instructions provided with your resin kit. This can take anywhere from a few hours to a couple of days.
• Once the resin has dried completely, check for any missed spots and add more gold leaf if needed.
• To protect the gold leaf, you can pour another layer of clear resin over the surface of the coaster. Make sure to follow the measurements and mixing instructions on your resin kit.
• Allow the second layer of resin to cure completely. This will ensure a smooth and durable finish.
• After the resin has fully cured, gently peel off the excess cardboard or mold and remove any dust or debris from the surface.
• Your gold leaf resin coasters are now ready to be used and admired!

When working with gold leaf and resin, it’s important to take some safety precautions. Make sure to protect your skin by wearing gloves and keeping your work area clean. Be mindful of any fumes and work in a well-ventilated space.

Gold leaf can be a delicate material, so handle it with care. Avoid touching it with your fingers to prevent fingerprints or smudges. If you do get fingerprints on the gold leaf, gently press a clean, dry cork or piece of wood onto the surface to remove them.

For beginners, it’s a good idea to practice on a small piece of stone or wood before attempting to embed gold leaf into your resin coasters. This will help you get a feel for how the gold leaf behaves and ensure the best results.

Remember to measure and mix your resin and hardener in the correct amounts. Follow the instructions provided with your resin kit to ensure a proper and complete cure.

Adding gold leaf to your resin coasters can take them to the next level, creating a beautiful and unique piece of art. Give it a try and enjoy the stunning results!

Pour Another Half

Once the first layer of resin has dried, it’s time to pour another half of the mixture. Make sure you have all the supplies listed in the previous section, and that you have thoroughly read the instructions for your specific resin brand.

Before you begin pouring, it’s important to cover the dried resin layer with a thin layer of clear epoxy resin. This will help to seal any gaps or imperfections that may have occurred during the first pour. Use a clean cloth or a torch to remove any dust or bubbles that may have settled on the surface.

When pouring the second layer, you might want to embed some flowers, leaves, or other natural materials. Make sure these objects are completely dried and clean before embedding them into the resin. Arrange them in a way that looks aesthetically pleasing to you.

Once you have everything set up, begin pouring the resin mixture over the first layer. Be careful not to pour too quickly or too close to the edge of the mold, as this can cause the resin to overflow. Instead, pour in the center and let it spread naturally to cover the entire surface.

As you pour, use a handheld torch or a heat gun to remove any air bubbles that may rise to the surface. Move the flame back and forth over the resin, being careful not to hold it too close or for too long as it can cause the resin to heat up too much. The heat will help the bubbles to rise and pop, leaving you with a clear and bubble-free surface.

Once the second layer is poured, allow the coasters to cure for the recommended amount of time specified by your resin brand. This is typically around 24 hours, but make sure to check the instructions for the exact drying time.

After the coasters have fully dried, you can remove them from the mold. If you’re using a silicone mold, simply press on the bottom of the mold to pop the coasters out. If you’re using a rigid mold, you may need to use a bit of force or tap the mold on a hard surface to release the coasters.

Now your resin coasters are complete! You can add cork or felt to the bottom to protect your furniture and prevent any scratching. These coasters make a beautiful and unique addition to any home decor and can be a great DIY gift for friends and family.

Stay tuned for our next section where we will cover how to make resin coasters with different techniques and materials.

Press Gold Leaf Down

If you want to add an extra touch of elegance to your resin coasters, why not try embedding some gold leaf flakes? Gold leaf is a thin piece of gold that is typically used for decorative purposes in art and craft projects. It can add a beautiful and luxurious finish to your coasters.

To begin, you will need some gold leaf flakes, which you can purchase from art supply stores or online. Make sure to choose high-quality flakes for the best results. You will also need a sealant or adhesive to secure the gold leaf flakes in place.

Before you start, ensure that your resin coaster is fully cured. You don’t want to press the gold leaf down onto the surface and have it sink into the resin. Once your coaster is dry and ready, follow these simple steps:

1. Take a piece of gold leaf and gently press it down onto the coaster’s surface. Start from the centre and press towards the edges. Be careful not to touch the gold leaf with your fingers, as the oils from your skin can leave fingerprints on the surface.
2. If your gold leaf flakes come in a kit, they may come with a sealant or adhesive. Use this to secure the gold leaf in place. Follow the instructions on the packaging for the best application method. If no sealant or adhesive is included, you can use a clear drying glue or varnish to seal the flakes onto the coaster.
3. Once the gold leaf is pressed down and secured, use a cloth or cardboard to gently rub over the surface. This will help to remove any excess flakes and ensure that the gold leaf is firmly attached.
4. If you want to make the gold leaf more visible, you can add some pigmented resin. Mix a small amount of resin with a gold or metallic pigment, and pour it into the coaster’s mould. Use a stirring stick to subtly swirl the pigmented resin with the gold leaf, creating a marbled effect.
5. Let the resin cure for the recommended time. This can vary depending on the brand of resin you are using, so refer to the instructions provided. Once the resin has fully cured, your gold leaf coasters are ready to use and display.

Pressing down gold leaf is a creative way to take your resin coasters to the next level. Whether you’re making them for yourself or as a gift, the added touch of gold leaf will surely make them stand out. Just remember to take necessary safety precautions when working with resin, and enjoy the process of creating your own unique and beautiful pieces of art!

Allow to Cure

Once you have poured your resin mixture into the molds, it is important to allow it to cure properly. This process is free and it will ensure that your coasters are fully hardened and ready to use.

Here are some detailed steps on how to allow your resin coasters to cure:

1. Check the specific curing time and instructions provided by the resin manufacturer. Each brand may have slightly different recommendations for curing time and temperature.
2. Place the molds in a well-ventilated area where they won’t be disturbed. Make sure the surface is level and clean, as any dust or dirt could be trapped under the resin.
3. If you are using a handheld torch or heat gun to remove any bubbles, gently go over the surface of the resin with the flame or heat. Be careful not to overheat the resin or cause it to bubble.
4. Cover the molds with a piece of cardboard or cloth to protect them from dust or any other objects that may land on the surface while curing.
5. Allow the resin to cure for the recommended time. Depending on the resin you are using, this could range from a few hours to several days.
6. During the curing process, the resin will harden and become clear. You will notice that it goes from a liquid state to a solid state.
7. After the curing time has passed, check the coasters for any missed spots or imperfections. If there are any, you can either leave them as is or pour a small amount of resin over the affected areas to fix them.
8. Once the coasters are fully cured, they are ready to be taken out of the molds. Carefully remove them by gently twisting or flexing the mold. If needed, you can use a cork or another object to help lift the coaster out.
9. Inspect each coaster for any imperfections or rough edges. If needed, use sandpaper or a file to smooth out the surface.
10. If you want to add any embellishments to your coaster, now is a good time to do so. You can use paint, pigmented resin, or even gold leaf to create a unique and creative piece.
11. To protect the surface of the coaster and give it a finished look, you can apply a sealant. Choose a sealant that is suitable for resin and follow the manufacturer’s instructions for application.
12. Once the sealant has dried, your resin coasters are complete and ready to use or gift to others.

When working with resin, it is important to take safety precautions. Make sure to work in a well-ventilated area, wear gloves and protective clothing, and watch out for any rise in temperature during the curing process. Follow the safety guidelines provided by the resin manufacturer.

Now that you know how to allow your resin coasters to cure, you can begin your DIY project with confidence. Enjoy the process of making these unique and beautiful pieces!

Make a Whole Set

To make a whole set of resin coasters, you will need to pour the resin onto a wooden board or any other flat surface. It is important to follow the instructions given by your resin manufacturer, as the curing time and temperature may vary. Once you have a clean surface to work on, you can begin pouring the resin mixture onto the board.

Pieces like flowers or other detailed items can be pressed onto the resin mixture, which will be embedded once the resin cures. Depending on the type of resin you are using, you may need to use a heat gun or torch to remove any bubbles that rise to the surface.

While the resin is curing, you can make your own coasters. Start by cleaning the dust off the molds and ensuring they are free from any moisture. Then, mix the resin according to the instructions listed on the packaging. You may also add pigmented or gold dyes to create a more unique look.

Once the coasters are ready, pour the resin mixture into each mold and allow it to cure. It is essential to check the curing time listed on the resin packaging and ensure that the coasters are left undisturbed until they are thoroughly dry. Using a clean cloth, you can then remove the coasters from the mold.

There are different amounts of resin and supplies needed depending on the number of coasters you want to make. For beginners, resin coaster-making kits are available for purchase. These kits often come with detailed instructions and all the materials you need to complete your own set of resin coasters.

When using resin, it is important to take precautions and ensure you are working in a well-ventilated area. The fumes from resin can be harmful if inhaled for extended periods. Additionally, resin should be used at room temperature to ensure proper curing.

So, whether you want to create a set of resin coasters for yourself or as a creative gift, these simple instructions and materials will help you make a whole set of beautiful and unique coasters.

How To Make Natural Object Resin Coasters

If you’re looking for a unique and creative way to add some natural beauty to your home decor, making natural object resin coasters is a great DIY project to try. By using objects from nature such as leaves, stones, or wood, you can create stunning and personalized coasters that are sure to impress your guests.

To begin, gather all the necessary supplies: artresin (which is a specific type of resin designed for artwork), measuring cups, popsicle sticks for stirring, a mixing container, a coaster mold, and the natural objects you want to embed in the resin.

Before you start working with resin, it’s important to take proper precautions. Make sure you’re in a well-ventilated area and wear gloves to protect your skin. Also, cover your workspace with a piece of cardboard or a plastic sheet.

First, thoroughly clean your natural objects to remove any dirt or debris. If you’re using wood slices, give them a light sanding to ensure a smooth surface. Once this is done, set them aside.

Next, mix the resin according to the instructions provided by the manufacturer. Typically, the resin will need to be mixed in equal parts – one part resin and one part hardener. Use measuring cups to ensure accuracy.

Once the resin mixture is ready, pour a small amount into the coaster mold. Use a popsicle stick or another tool to evenly spread the resin across the entire surface of the mold.

Now, carefully place your natural objects into the mold. Arrange them in a way that you find aesthetically pleasing. You can press them down slightly to ensure they’re fully submerged in the resin.

Allow the resin to cure for a few minutes. During this time, you may notice air bubbles rising to the surface. To get rid of these bubbles, gently blow on them or use a heat gun on a low setting to zap them.

After letting the resin cure for about 3 to 6 hours (or as per the instructions on the artresin package), you can carefully remove the coasters from the mold.

If you prefer a glossy finish, you can sand the top of the coasters with a fine-grit sandpaper and then apply another layer of resin over them. This will give them a smooth and shiny appearance.

Finally, to protect your new resin coasters and prevent any scratches on your furniture, you can attach small cork or felt adhesive pads to the bottom of each coaster.

Now that you have your beautiful natural object resin coasters, you can proudly display them in your home or give them as a thoughtful and handmade gift to your loved ones. The possibilities are endless, and you’re sure to love the unique touch these coasters add to any space.

1 Ensure your coaster base is clean and free of dust or fingerprints

Before you begin making your resin coasters, it’s important to ensure that your coaster base is clean and free of any dust or fingerprints. This step is crucial because any imperfections or debris on the surface can affect the overall appearance and quality of your finished coasters.

To clean your coaster base, start by wiping it down with a damp cloth to remove any dust or dirt. Make sure to dry it thoroughly before proceeding. You can also use a sealant or primer to create a smooth surface and protect the base from potential damage.

If your coaster base is made of a porous material like stone or cardboard, you may need to apply multiple coats of the sealant to fully seal the surface. Allow each coat to dry completely before applying the next one. This will help ensure that your resin mixture doesn’t seep into the base and compromise the final result.

Once the base is clean and sealed, you’re ready to start pouring the resin mixture onto it. Make sure to follow the instructions provided by the specific resin brand you’re using, as the pouring technique may vary. Some resins require you to mix equal parts of resin and hardener, while others may have different ratios.

Measure the exact amounts of resin and hardener as directed and mix them together thoroughly. You can use a handheld mixer or stir it by hand with a wooden stick. Be sure to mix it gently to avoid creating air bubbles in the resin.

If you want to add any embedments, such as dried flowers or gold leaf flakes, now is the time to do so. Place them onto the base and gently press them down with your fingers or a wooden stick. Remember to arrange them evenly and to your liking.

Once your resin mixture is ready, carefully pour it onto the base. Start at the center and work your way outwards in a circular motion to ensure even coverage. You can use a torch to remove any air bubbles that may have formed during the pouring process. Simply pass the flame over the surface of the resin, being careful not to overheat it. The heat from the torch will cause the bubbles to rise to the surface and pop.

Now, all you need to do is wait for the resin to cure. The curing time will depend on the specific resin brand you’re using, but it usually takes around 24-48 hours. During this time, make sure to protect your coasters from dust or any other potential contaminants by placing them in a safe and clean area.

After the curing process is complete, you can remove the coasters from the molds and they’re ready to use! If there are any rough edges or imperfections, you can sand them down gently with fine-grade sandpaper. Remember to take safety precautions and wear a mask to protect yourself from inhaling any dust particles.

There you have it – a simple and beginner-friendly technique for making resin coasters. With just a few supplies and some creativity, you can create beautiful and personalized coasters that you’ll love to use and show off!

2 Measure Stir Resin Hardener

After gathering all the necessary materials, it’s time to begin making your resin coasters. Follow these simple steps:

1. Start by ensuring you have a clean and dust-free work area. You can use a cloth or wood to wipe away any dirt or debris.
2. Next, measure the required amount of resin and hardener according to the instructions provided with your resin kit. Make sure to follow the instructions carefully to get the right mixture.
3. Using a handheld torch or a heat gun, zap any air bubbles that may be trapped in the resin mixture. This step is crucial to ensure a smooth finish on your coasters.
4. If you’re planning to embed any objects like flowers or leaves in the resin, make sure they are dry and free of any sealant. It’s best to use natural materials for embedding.
5. Once you have your resin and hardener mixed, you can add some color if desired. There are various sources available online where you can purchase resin dyes or use acrylic paint.
6. The next step is to pour the resin mixture into the coaster mold. You can choose to pour a thin layer or fill it up completely, depending on the desired thickness of your coaster.
7. After pouring, use a popsicle stick or a toothpick to press any flower or object into the resin. This will help it to be fully submerged and prevent it from floating to the top as the resin cures.
8. Allow the resin to cure at room temperature for about 24 hours. Make sure to keep it in a dust-free and level area to avoid any disruptions during the curing process.
9. Once your resin has fully cured, carefully remove it from the mold. If you’re using a silicone mold, it should be easy to flex and pop the coaster out. For a rigid mold, you may need to gently twist and press to release the coaster.
10. Inspect the coaster for any missed air bubbles or imperfections. If necessary, you can use a handheld torch or heat gun to zap any surface bubbles that may have formed during the curing process.
11. Finally, if you’d like to add a glossy finish to your coaster, you can apply a layer of resin on top. Use a brush or popsicle stick to spread the resin evenly and allow it to cure completely.

By following these detailed instructions, beginners can easily create their own unique resin coasters. Just make sure to read and follow all safety instructions that come with your resin kit. Enjoy making your own beautiful and functional coasters!

3 Pour the ArtResin onto the centre of your coaster

After the preparation and introduction steps listed in parts 1 and 2, you are finally ready to pour the ArtResin onto your coaster. This step is where the magic happens and your coaster starts to come to life.

To begin, make sure you have all your supplies and tools handy, including the ArtResin mixture, the coaster mold, a piece of cardboard or cork to protect your work surface, and any other creative additions like gold flakes or flower petals.

First, double check that your coaster mold is clean and free of any dust or debris. You don’t want any fingerprints or unwanted particles getting mixed into your resin. It’s crucial to have a smooth and even surface for the resin to pour onto.

Gently pour the ArtResin mixture onto the centre of your coaster mold. Be careful not to pour too quickly or aggressively, as this can cause the resin to overflow or rise unevenly. Take your time and pour it in a slow and controlled manner.

Make sure to evenly distribute the resin mixture over the entire surface of the coaster. You can use a tool like a popsicle stick or a heat gun to help spread the resin and ensure that it covers every corner and edge. This step is essential for achieving an even and level finish.

Once the resin is poured and spread evenly, you can add any desired creative elements like gold flakes or flower petals. These additions can be gently pressed into the resin to create unique patterns and designs.

After pouring and decorating, allow the coaster to sit undisturbed for at least 24 hours. This will give the resin enough time to cure and harden. Make sure to place the coaster in a spot where it won’t be disturbed and where the temperature is stable. Fluctuations in temperature can affect the curing process.

Throughout the curing process, you may notice some air bubbles rising to the surface of the resin. To eliminate these, you can use a heat gun or torch to gently heat the surface of the resin, which will cause the bubbles to pop. Be careful not to hold the heat source too close or for too long, as this can damage the resin.

Once the resin has fully cured and hardened, you can carefully remove the coaster from the mold. If the mold is made of silicone or another flexible material, gently bend the mold away from the resin to release it. If the mold is rigid, you can use a tool like a craft knife to carefully pry the resin away from the mold.

After removing the coaster from the mold, check for any missed spots or imperfections. If you notice any, you can touch them up with more resin using a small paintbrush or a toothpick. Allow the touch-ups to fully cure before using or displaying the coaster.

The pouring stage is one of the most exciting and crucial parts of making resin coasters. It’s where you get to see all your hard work and creativity come together. Just remember to take your time, follow the listed steps, and have fun with the process. Soon enough, you’ll have a beautiful and unique resin coaster to enjoy or give as a gift!

4 Use your Torch Zap Out The Bubbles

Once your resin mixture is poured into the molds, it’s time to remove any bubbles that may have formed. Bubbles can make your coasters look imperfect and unprofessional, so it’s important to eliminate them.

A great way to get rid of bubbles is by using a torch. A DIY gun-torch works well for this specific technique. Before you use the torch, make sure you are in a well-ventilated area and you have all the necessary safety precautions in place.

To start, allow the resin to cure for about 2 to 3 minutes. This will thicken the mixture slightly, making it easier to work with. If you notice any bubbles on the surface, gently press them down with a heat-resistant tool like a popsicle stick or the side of a spoon.

Next, take your torch and hold the flame about 10 centimeters away from the resin surface. Move the flame evenly across the coaster, making sure to cover all areas. This will help release any trapped air bubbles. Be careful not to hold the flame in one spot for too long, as it can create a burn mark.

Continue to move the flame over the surface until you no longer see any bubbles. Be sure to check from different angles to ensure all bubbles have been addressed. This technique will ensure that your coasters have a smooth and bubble-free finish.

Once you have zapped out the bubbles, set your coasters aside to fully cure. Follow the instructions listed on your resin kit for the specific curing time. It’s important to let the resin dry completely before moving on to the next step.

While the resin is drying, take the time to clean up your workspace. Use a cloth to wipe down any resin that may have dripped or spilled onto your work surface. Clean your tools and make sure everything is put away properly.

It’s also a good idea to check for any fingerprints or other imperfections on the surface of your coasters. If you notice any, you can use sandpaper or a fine-grit sanding block to gently sand down the affected area. This will create a smooth and even surface.

Once your coasters are fully cured and all imperfections have been addressed, you can move on to the next step in the preparation process. This may involve adding a sealant or protective coating to the surface of your coasters, depending on the specific instructions listed on your resin kit.

Remember to take your time and be creative with your resin coasters. This DIY project allows you to express yourself and create unique pieces that reflect your style and personality. Enjoy the process and have fun!

Источники:

– Joanne. “How to make resin coasters: an easy art project with great results.” https://feltmagnet.com/crafts/how-to-make-resin-coasters-retro-fun

– “Resin Coasters.” https://epoxycountertopdiy.com/resin-coasters/

6 Check For Any Missed Bubbles

After you have poured the resin mixture into the molds and tapped them to release any air bubbles, it is important to check for any missed bubbles. This step is crucial to ensure that your coasters turn out perfectly.

To check for any missed bubbles, start by watching the surface of the resin. If you see any small bubbles rising to the surface, gently blow on them or use a heat gun/torch to get rid of them. You can also use a toothpick or a pin to pop any larger bubbles that may have formed.

Another technique you can use is to lightly drag a clean cloth or piece of cardboard over the surface of the resin. This will help to pop any hidden bubbles and make the surface even.

If you notice any bubbles popping up after you have checked the surface, you can use a toothpick or a stir stick to pop them. Simply dip the toothpick or stir stick into the resin and gently press it onto the bubble. The bubble should pop and the resin will fill in the gap.

It is important to be thorough in checking for any missed bubbles to ensure a smooth and professional-looking finish for your coasters. Take your time and inspect each coaster carefully. Remember to check all sides and angles of the coaster, as bubbles can be trapped in various areas.

Once you have checked for any missed bubbles and are satisfied with the surface, let the coasters sit undisturbed for the recommended drying time listed in the introduction or on the resin packaging. This will typically be around 24-72 hours, but be sure to check the specific instructions for the resin you are using.

During this time, it is important to keep the coasters in a well-ventilated area to allow the resin to cure properly. Avoid touching or moving the coasters to prevent any disturbances in the resin surface.

After the coasters have dried completely, you can remove them from the molds. If the molds are non-stick, they should come out easily. If they are not, you may need to gently stretch or bend the mold to release the coasters.

Once the coasters are free from the molds, check them again for any missed bubbles. If you notice any, you can use a sealant or a layer of clear resin to fill in the gaps.

Now that you have checked for any missed bubbles and ensured the coasters are properly cured, you can enjoy your beautiful and unique resin coasters. Whether you choose to keep them for yourself or give them as gifts, they are sure to be a stunning addition to any home or office.

7 Cover your Piece

Once your resin is fully mixed, it’s time to cover your piece. Make sure that your work area is well-ventilated and that you have taken all necessary safety precautions. You should also have all the materials and tools you will need within reach.

First, place your mold onto a piece of cardboard or a board to ensure stability. If you are making multiple coasters, arrange them in a way that allows for easy pouring and manipulation.

Next, take your guntorch and carefully heat the surface of your resin. This will help to eliminate any bubbles and ensure a smooth finish.

Now, slowly pour the resin onto the center of your piece, allowing it to spread evenly. Use a popsicle stick or a stir stick to help guide the resin to the edges if needed.

Once the resin is poured, use a popsicle stick or your fingers to press any embedded objects down into the resin. Be careful not to touch the resin with your bare skin, as it can cause irritation.

If you are using pigmented resin or adding any additional layers, now is the time to do so. Follow the instructions provided by your resin manufacturer for the specific pigmentation process.

After pouring and embedding, take a moment to carefully watch your piece for any bubbles that may rise to the surface. Use a guntorch or a small stick to zap any missed bubbles and ensure a smooth finish.

Once you are satisfied with the look of your piece, cover it with a board or a sealant to keep dust and other debris from settling on the surface as it dries. Allow the resin to cure for the specified amount of time, usually around 24 hours.

After the curing time has passed, carefully remove your coasters from the mold. If there are any rough edges or imperfections, you can carefully sand them down using sandpaper or a small Dremel tool.

Your resin coasters are now complete! Give them a thorough cleaning and they are ready to be used or given as gifts. Enjoy your new handmade creations and the satisfaction of a job well done!

About the author Joanne Wright

Joanne Wright is a DIY enthusiast and a passionate resin artist. With over 4 years of experience in resin crafting, she has listed detailed step-by-step instructions on how to make resin coasters. Joanne loves experimenting with different materials and techniques to create unique and beautiful resin art pieces.

When it comes to resin crafting, Joanne always prioritizes safety. She ensures to work in a well-ventilated area and follows the proper safety measures to protect herself and others. Joanne understands that resin can be a bit tricky to work with, especially for beginners, so she provides clear and easy-to-follow instructions to make the process smoother for everyone.

Joanne is also a big fan of using embed objects in her resin coasters. She loves to add flowers, gold leaf, and even pressed flakes to create stunning and eye-catching designs. Joanne believes that the creative possibilities with resin are endless, and she encourages others to explore their own unique ideas.

In her free time, Joanne enjoys gathering inspiration from nature and her surroundings. She pays attention to every detail and ensures that her resin coasters are not only visually appealing but also functional and durable. Joanne knows the importance of using the right materials and proper techniques to make resilient and long-lasting coasters.

If you’re interested in making resin coasters, Joanne’s guide is a must-read. Her expertise and love for this craft shine through in her detailed instructions. Whether you’re a beginner or an experienced resin artist, Joanne’s tips and techniques will surely help you create beautiful and unique coasters that you’ll love to show off.